Version 1.1
Recently I described the lock sport kit I have built based around the Dangerfield Serenity kit. The Serenity kit gives a pretty good selection to build a kit around.
A hypothetical challenge has been posed to me. If I was putting together a new kit, perhaps to be associated with this blog and my other writings, what would be my wish-list contents?
The case would have reasonable room for a user to add additional items. Four pockets would be prudent. It would be nice if there was room for my skeleton keys and similar related items.
The contents of the kit effectively divide into three groups: SPP, raking and turning tools.
SPP is the field I have least experience with, but to my mind any kit should include some provision for practising and developing these skills. A kit should have a standard or partial hook and a half-diamond, at least. Notably the Serenity kit did not have a standard hook. Perhaps it was felt that the two reach tools (one angled, one curved) could do the same job. A more conventional hook seems desirable, even if it is just so the user can establish they prefer other tools. The high hook in the Serenity set I have not had much success with. I have even managed to get it stuck in locks. Gonzo hooks seem popular with many SPPers, so this may be a better substitution. I ended up rounding the tip of my high hook into a Gonzo-like hook and it handles somewhat better.
Standard hook/ euro-hook, Gonzo hook, half-diamond and a couple of reach/ offset tools for good measure seems reasonable for the SPP component, but I am open to suggestions from those with more experience in this field than myself.
Turning tools: I think a kit should contain several of these, and have provision for the user to add additional examples. Many pickers prefer prybars but I like L and Z shaped tools. The Southern Specialities six-piece set that is included with the twelve-piece Toool set and 2500 Series turning set seems to me like a good basis to start with. I would bend the ends of each tool so the narrower (2.4mm) examples also have a 12mm long nose and the wider (3.18mm) examples also have a 6mm short nose. This gives twelve width/ thickness/ length combinations in a relatively compact package. Perhaps there would be a related prybar set you could take as an option or addition.
Rakes: At least one Bogota! A triple-hump, although I’d not complain if there was a spare also. Perhaps give one triple a standard twist and the other a euro-twist for variety. I have yet to try a double-hump so I would not object if one was included in this kit. My recent experiences suggest more humps are more useful so perhaps a four or five hump Bogota. instead. Some of my easiest SPPs have been with a half-diamond so I would be happy to have a single-hump Bogota included too. This would be my reserve/ alternate half-diamond. There may be a case for making the other half-diamond pick a different size to the Bogota. The selection of rakes would also include something like the Sparrow Octo rake and the Warlock too. The final type of rake would be something that can handle keyways that the Bogotas, Octo’ and Warlock are too big for. This might be something like a snake rake or worm rake, but the wire finger rakes have impressed me recently. Perhaps a five-peak continuous wave and a three-hump Sabana-style? This would be either wire or flat stock, whichever works best. That is eight rakes, including the duplicate triple-hump Bogota. Five SPP tools and six turning tools makes 19 pieces. Perhaps add an adjustable wishbone turning tool to make it an even 20?
Handles are something that would distinguish this kit. The Dangerfield Bogotas and Sohos in my Serenity kit are designed to double as standard-width turning tools. An additional benefit of this feature is that the tools nest together and take up very little room within a pouch. Four rakes take up less than a centimetre of width. I would like it if the various Bogota rakes in my hypothetical kit were designed the same. These could serve as general use turning tools, reserving the dedicated turning tools for more specialized applications.
The real world Octo rake and Warlock have very wide handles with decorative transfers. For my kit there would be something plainer and less bulky. Perhaps this might be a rod or flat bar with an Octo rake head at one end and a Warlock at the other. The “narrow” rake might also be a double-ended tool: a three-hump Sabana one end, five-peak wave at the other. Flat bar would allow rocking as well as scrubbing actions, the latter difficult with springy wire.
What kind of handles should the SPP tools have? Bogota-type handles for these would make for a very compact kit indeed. On the other hand, SPP tools may be used for longer durations than rakes. Perhaps there is merit in giving these more conventional grips, perhaps designed along the lines I suggest in a previous article. The thermoplastic handle on the Sparrow Worm rake seems like a good model. Most of my picks lack handle materials and I have never found that a problem. A case can be made that you get better feedback without.
The idea of creating a double-ended Octo/ Warlock and narrow rake reduces the number of pieces to 18, but twelve of these are double-ended and/or multi-functional!
Update: I have become fond of the double ended picks in the Honest Dong Shi wave rake kit. I would have no objection to the SPP picks being double-ended as well. Perhaps a hook/ gozo, a reach/ offset and a half-diamond paired with a larger variant, similar to the princess or Goso p-nuckle.